Prolink Hurricane 9000G Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Směrovače Prolink Hurricane 9000G. PROLiNK Hurricane 9000G User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 62
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Hurricane 9000G
802.11g ADSL Router with VPN and Firewall
User’s Manual
Version 1.0
Zobrazit stránku 0
1 2 3 4 5 6 ... 61 62

Shrnutí obsahu

Strany 1 - Hurricane 9000G

Hurricane 9000G 802.11g ADSL Router with VPN and Firewall User’s Manual Version 1.0

Strany 2

802.11g ADSL Router 6 2.3 The Rear Ports Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 R

Strany 3 - Table of Contents

Chapter 2 Using the ADSL Modem/Router 7 So long as the cables are connected and the LEDs are lit normally, follow section “3.2 Configuring the Network

Strany 4 - ... 58

8 Chapter 3 Configuration The ADSL Router can be configured with your Web browser. The web browser is included as a standard application in following

Strany 5 - Introduction

Chapter 3 Configuration 9 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties

Strany 6 - 1.3 Features

802.11g ADSL Router 10 Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Di

Strany 7 - Chapter 1 Introduction

Chapter 3 Configuration 11 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click

Strany 8 - 1.4 Application

802.11g ADSL Router 12 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. 5. Then select the DNS

Strany 9 - Using ADSL Modem/Router

Chapter 3 Configuration 13 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network a

Strany 10 - 2.4 Cabling

802.11g ADSL Router 14 User Name Password Administrator Level admin password User Level user password 2. Device IP Network settings in LAN site IP

Strany 11

Chapter 3 Configuration 15 PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service Name, and Domain Name System (DNS) IP address (

Strany 13 - Chapter 3 Configuration

802.11g ADSL Router 16 If you want to configure the device with administrator level, type admin in the username field and password in the password fi

Strany 14 - 802.11g ADSL Router

Chapter 3 Configuration 17 3.4.1.1 Status – ADSL Status Displays the status of your ADSL connection. It will refresh every two seconds.

Strany 15

802.11g ADSL Router 18 3.4.1.1.1 ADSL Status – WAN Status 3.4.1.1.2 ADSL Status – ATM Status

Strany 16

Chapter 3 Configuration 19 3.4.1.2 Status – LAN Status Displays the status of your Local Area Network (LAN) connection.

Strany 17 - 3.2 Factory Default Settings

802.11g ADSL Router 20 3.4.1.2.1 LAN Status – TCP Status 3.4.1.3 Status- PPP Status Displays the status of your PPP connection. It will refresh ever

Strany 18 - 3.3 Information from ISP

Chapter 3 Configuration 21 3.4.1.4 Status- VPN Connect Status Through this page you can check connection status of Virtual Private Network (VPN). Onc

Strany 19

802.11g ADSL Router 22 3.4.1.6 Routing Table Display the current routing paths of the ADSL Router.

Strany 20 - 3.4.1 Status

Chapter 3 Configuration 23 3.4.1.7 System Log Display the system logs cumulated till the present time. You can trace the historical information throug

Strany 21 - 3.4.1.1 Status – ADSL Status

802.11g ADSL Router 24 3.4.2 Quick Start If you use this device to access the Internet through the ISP, this web page is enough for you to configure

Strany 22

Chapter 3 Configuration 25 3.4.3 Configuration When you click this item, you get following sub-items to configure the ADSL Router. WAN, LAN, Wireless,

Strany 23 - 3.4.1.2 Status – LAN Status

i Table of Contents Chapter 1 ... 1 INTRODUCTION ..

Strany 24 - 3.4.1.3 Status- PPP Status

802.11g ADSL Router 26 Virtual Circuit Virtual Circuit: Enable/Disable the settings of this VC. Bridge: If you set this device to be brid

Strany 25

Chapter 3 Configuration 27 Encapsulation: There are eleven ways ― PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux, PPPoA LLC, 1483 Bridged IP VC-Mu

Strany 26 - 3.4.1.6 Routing Table

802.11g ADSL Router 28 MTU: Maximum Transmission Unit indicates the network stack of any packet is larger than this value will be fragmented before th

Strany 27 - 3.4.1.8 Security Log

Chapter 3 Configuration 29 DHCP Server DHCP Server: Check DHCP Server to enable the router to distribute IP Addresses, subnet mask and DNS setting to

Strany 28 - 3.4.2 Quick Start

802.11g ADSL Router 30 Encryption Key: Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP Encryption Key values on

Strany 29 - 3.4.3 Configuration

Chapter 3 Configuration 31 3.4.3.4 System There are five items under the System section: Password, Time Zone, Upgrade, Factory Setting and Restart.

Strany 30

802.11g ADSL Router 32 3.4.3.4.2 Time Zone The Router does not have a real time clock on board; instead, it uses the simple network time protocol (

Strany 31

Chapter 3 Configuration 33 Automatically adjust clock for daylight saving changes: It is optional for different time zone area. SNTP Server IP Addres

Strany 32 - 3.4.3.2 LAN

802.11g ADSL Router 34 To upgrade the firmware of the ADSL Router, you should download or copy the firmware to your local environment first. Press th

Strany 33 - 3.4.3.3 Wireless

Chapter 3 Configuration 35 3.4.3.4.5 Restart In case the router stops responding correctly or in some other way stops functioning, you can perform th

Strany 34 - 3.4.3.3.3 WLAN Security

802.11g ADSL Router ii 3.4.3.4.5 Restart ...

Strany 35 - 3.4.3.4 System

802.11g ADSL Router 36 Add: Click this button to add a new packet filter rule. After click, next figure will appear. Edit: Check the Rule No. you wan

Strany 36 - 3.4.3.4.2 Time Zone

Chapter 3 Configuration 37 Active: Choose “Yes” to enable the rule, or choose “No” to disable the rule. Packet Type: Specify the packet type (TCP, UDP

Strany 37 - 3.4.3.4.3 Upgrade

802.11g ADSL Router 38 Enable Bridge Filtering: Check Yes to enable this function or check No to disable. Src MAC: Enter the source MAC address. Dest

Strany 38 - 3.4.3.4.4 Factory Setting

Chapter 3 Configuration 39 3.4.3.5.4 Block WAN Request Check “Enable” if you want to exclude outside PING request from reaching on this router.

Strany 39 - 3.4.3.5 Firewall

802.11g ADSL Router 40 3.4.3.5.5 URL Blocking URL blocking function enables you to avoid your LAN PCs from accessing some URLs. You must check the “E

Strany 40

Chapter 3 Configuration 41 3.4.3.6 VPN (Virtual Private Networks) we will introduce the VPN settings to establish a secure communication path with re

Strany 41 - 3.4.3.5.2 Bridge Filtering

802.11g ADSL Router 42 Remote Gateway IP or Host Name: the public IP address or host name of remote VPN device. For example, it may be jet.dyndns.org

Strany 42

Chapter 3 Configuration 43 3.4.3.7 Virtual Server Being a natural Internet firewall, the ADSL Router protects your network from being accessed by out

Strany 43 - 3.4.3.5.4 Block WAN Request

802.11g ADSL Router 44 Public Port (from) & Port (To): Enter the public port number & range you want to configure. Port Type: Select TCP if

Strany 44 - 3.4.3.5.5 URL Blocking

Chapter 3 Configuration 45 3.4.3.8.2 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP address. In the Internet, every

Strany 45

1 Chapter 1 Introduction 1.1 An Overview of the ADSL Router ADSL VPN Firewall Modem/Router provides a high-speed Ethernet port for high-speed Internet

Strany 46

802.11g ADSL Router 46 3.4.3.8.3 Dynamic DNS With Dynamic DNS service, a domain name can be translated into a dynamic IP address, which is often iss

Strany 47 - 3.4.3.7 Virtual Server

Chapter 3 Configuration 47 Check the “Enable” button to access the Dynamic DNS service. You may sign up Dynamic DNS service at http://www.dyndns.org a

Strany 48 - 3.4.3.8 Advanced

802.11g ADSL Router 48 Session Name: Enter the desired session name. User’s IP: Allows the user to assign the IP address to map the corresponding NAT/

Strany 49 - 3.4.3.8.2 DNS

Chapter 3 Configuration 49 3.4.3.8.5 RIP RIP: Default is Disabled. Border Gateway: Default is Enabled. Supply Interval  seconds: The default value i

Strany 50 - 3.4.3.8.3 Dynamic DNS

802.11g ADSL Router 50 3.4.3.8.6 SNMP Simple Network Management Protocol (SNMP) is an optional feature that may or may not be supported by your ADS

Strany 51 - 3.4.3.8.4 NAT

Chapter 3 Configuration 51 SNMP is an application layer protocol that is used for managing networks. SNMP is an optional feature that may or may not b

Strany 52

802.11g ADSL Router 52 Add: Click this button to add a new static routing. When you click this button, the next figure appears. Delete: Check the ite

Strany 53 - 3.4.3.8.5 RIP

Chapter 3 Configuration 53 3.4.3.8.8 MISC Configuration HTTP server access: Default at Restricted. HTTP server port: Default at 80. FTP server: Defau

Strany 54 - 3.4.3.8.6 SNMP

802.11g ADSL Router 54 3.4.3.8.9 Diagnostic Test As soon as you enter the test program, all tests will run automatically to diagnose the connection st

Strany 55 - 3.4.3.8.7 Static Routing

Chapter 3 Configuration 55 This test sends ATM OAM F5 Segment loop back request cells to the central office equipments through your DSL connection. Th

Strany 56

802.11g ADSL Router 2 1.2 Package Contents 1. 802.11g ADSL Router 2. One CD-ROM containing User’s Manual 3. One Quick Start Guide 4. One RJ-11 ADS

Strany 57 - 3.4.3.8.8 MISC Configuration

56 3.4.4 Save Config Click the Submit button to write settings to Router. Then, the system will reboot for changes to take effect.

Strany 58 - 3.4.3.8.9 Diagnostic Test

57 Chapter 4 Troubleshooting If the ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before con

Strany 59

58 APPENDIX Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section of the User’s Manual in

Strany 60 - 3.4.4 Save Config

Chapter 1 Introduction 3 example, user can assign a PC in LAN acting as WEB server inside and expose it to the outside network. Outside user can brows

Strany 61 - Troubleshooting

802.11g ADSL Router 4 1.4 Application

Strany 62 - APPENDIX

5 Chapter 2 Using ADSL Modem/Router 2.1 Cautions for Using the ADSL Modem/Router Do not place the router under high humidity and high temperature. D

Komentáře k této Příručce

Žádné komentáře